- Детали
-
Објавено: Вторник, 29 Март 2016 07:58
-
Напишано од Bodal
Category: Products for machining - active non-emulsifying
ISO-L-MHF
SRPS B.H3.526
FAM IS 03 051
Active, mineral base, cutting oil. It is used for cooling and lubrication in processing carbon and low alloy steels by cutting, characterized by low resistances. It is not recommended for processing of light metals, non-ferrous metals and their alloys.
Viscosity at 40 ºC (mm²/s) |
17 |
Density at 20 ºC (g/mL) |
0.880 |
Flash point (ºC) |
min 180 |
Packing |
20kg 180kg |
- Детали
-
Објавено: Вторник, 29 Март 2016 07:56
-
Напишано од Bodal
Category: Products for machining - active non-emulsifying
ISO-L-MHF
SRPS B.H3.526
FAM IS 03 051
Active, mineral base, cutting oil. It is used for cooling and lubrication in processing of steel and grey iron by cutting, which is characterized by medium-difficulty processing conditions
Viscosity at 40 ºC (mm²/s) |
30 |
Density at 20 ºC (g/mL) |
0.890 |
Flash point (ºC) |
min 180 |
Packing |
180kg |
- Детали
-
Објавено: Вторник, 29 Март 2016 07:55
-
Напишано од Bodal
Category: Products for machining - active non-emulsifying
ISO-L-MHF
SRPS B.H3.526
FAM IS 03 051
Active, mineral base, cutting oil. It is used for cooling and lubrication in processing of high alloy steels by cutting, characterized by high speeds. It is not recommended for the processing of light metals, non-ferrous metals and their alloys.
Viscosity at 40 ºC (mm²/s) |
19 |
Density at 20 ºC (g/mL) |
0.900 |
Flash point (ºC) |
min 185 |
Packing |
180kg |
- Детали
-
Објавено: Вторник, 29 Март 2016 07:54
-
Напишано од Bodal
Category: Products for machining - active non-emulsifying
ISO-L-MHF
SRPS B.H3.526
FAM IS 03 051
Active, mineral base, cutting oil. It is used for cooling and lubrication in processing of steel and grey iron by cutting, characterized by medium difficult processing conditions. It shows particularly good results in operations of gear hobbing, planing, profile grinding, thread rolling. It is not used for the processing of light and non-ferrous metals and their alloys.
Viscosity at 40 ºC (mm²/s) |
19 |
Density at 20 ºC (g/mL) |
0.890 |
Flash point (ºC) |
min 180 |
Packing |
20kg 180kg |
- Детали
-
Објавено: Вторник, 29 Март 2016 07:53
-
Напишано од Bodal
Category: Products for machining - active non-emulsifying
SO-L-MHF
SRPS B.H3.526
FAM IS 03 306
Active, mineral base, cutting oil. It is used for cooling and lubrication in processing of high alloy and stainless steels, high temperature resistant steels, grey iron by the operation of external and internal vertical profile broaching in normal and high drawing speeds. It can be used also for the operations of deep drilling, threading and tapping
Viscosity at 40 ºC (mm²/s) |
15 |
Density at 20 ºC (g/mL) |
0.980 |
Flash point (ºC) |
min 145 |
Packing |
180kg |
- Детали
-
Објавено: Вторник, 29 Март 2016 07:52
-
Напишано од Bodal
Category: Products for machining - active non-emulsifying
1ISO-L-MHF
SRPS B.H3.526
FAM IS 03 304
Active, mineral base, cutting oil. It is used for cooling and lubrication in processing of steel and grey iron by all the procedures of deep drilling in medium load conditions.
Viscosity at 40 ºC (mm²/s) |
12 |
Density at 20 ºC (g/mL) |
0.920 |
Flash point (ºC) |
min 160 |
Packing |
180kg |